Slinger with rubber tires
Our Slinger can spread material at rates 3 to 4 cubic yards per minute. With gravel, this translates into nearly 6 tons per minute. The speed with which material is spread and the distance at which it is placed is controlled by the operator. It has about a 6 cubic yard hopper that can be easily loaded during operation with a small wheel loader. The large capacity box is designed to be loaded continuously so application doesn’t have to stop. It can spread a variety of materials including composts, wood chips, cement, soils, sands, gravels, and up to 3 inch rock. Dramatically reduce time spent spreading the material by reducing or eliminating the labor usually used in manually spreading it. When needed, our Slinger can throw the material up to 160 feet or gently place the material close in. The direction, speed, and flow of material can be completely controlled, avoiding any damage caused by impact when working around pipes, liners, and fabrics. It is configured for precise movements and accurate placement. Also, it is controlled entirely with remote control. It allows the operator to work from any vantage point for better safety and accuracy. Accessibility is key for the Slinger, and with its all wheel drive and off road suspension it can go wherever the job is. Our Slinger can also place or spread material while traveling, allowing it to spread compost and soil mixes for reclamation or restoration projects. It also enables it to fill trenches at precise depths and install sand filled containment tubes in place.
Slinger with rubber tracks
Our track mounted Slinger maintains all the functionality of our unit with tires but has more maneuverability with the tracks. This machine is built for the steepest and nastiest off road conditions. Also, the tracks permit a ultra light footprint of only 4 - 7 pounds per square inch, which make this machine excellent for sensitive terrain such as golf courses and marshlands. This Slinger has 10 yard hopper and can sling material up to 80 - 110’.
reloader for Slingers
When combined with our Slingers our Reloader dramatically increases the efficiency of the job and reduces manpower needed to get it done. This machine has a 48” heavy-duty feed belt that can quickly reload our slingers and get them back to work. Built to handle heavy loads, the reloader can be loaded with stnadadr dump/haul trucks and trailers. The belt height can be adjusted from 10 - 13’.